包简介

Provides Landing Page Builder with components

README 文档

README

EzContent Page Builder: Empowers content creators, even with minimal technical knowledge, to design and publish engaging, SEO-friendly landing pages using Drupal's intuitive layout builder and rich component library.

Installation

A. Create a new project using composer

1. Firstly, To create a new project and navigate to the project directory, you need to execute the following commands:

composer create-project drupal/recommended-project:^10.0 pagebuilderez
cd pagebuilderez;

2. For Composer to understand your new Recipe install-type, you need to require the Composer Installer Extender package.

composer require oomphinc/composer-installers-extender:2.0.1

3. Next, you need to add two entries in composer.json for an install-type and its path:

"installer-types": ["drupal-recipe"],
"installer-paths": {
 // existing entries omitted...
 "docroot/recipes/contrib/{$name}": [
   "type:drupal-recipe"
 ]
}

4. Execute the specified commands to include these two repositories in the composer.json file

composer config repositories.drupal8 composer https://packages.drupal.org/8
composer config repositories.asset-packagist composer https://asset-packagist.org

5. To configure the minimum stability and enable patching, execute the following commands

composer config minimum-stability dev
composer config extra.enable-patching true

6. To enable specific composer plugins for patching and installation purposes, execute the following commands

composer config --no-plugins allow-plugins.cweagans/composer-patches true
composer config --no-plugins allow-plugins.oomphinc/composer-installers-extender true

7. To install Composer Patches Plugin and Drush, execute the following commands

composer require cweagans/composer-patches
composer require drush/drush

8. To merge the composer.libraries.json file into your main composer.json, install the Composer Merge Plugin. From the project directory, open a terminal and run

composer require wikimedia/composer-merge-plugin

9. Then Edit the composer.json file of your Drupal website, and under the "extra" section add this entry

"merge-plugin": { "include": [ "web/modules/contrib/*/composer.libraries.json" ] }

10. To require the dev-main branch of ez page builder, execute this command

composer require drupal/ez_page_builder:^1.0.1

11. Now run below commands to configure your site

composer install
drush si
drush recipe recipes/contrib/ez_page_builder;

B. Create a new project using ddev

1. Firstly, To create a new project and navigate to the project directory, you need to execute the following commands:

composer create-project drupal/recommended-project:^10.0 pagebuilderez
cd pagebuilderez;

2. To set up config and start your ddev project, execute the following commands

ddev config --project-type=drupal9 --docroot=web --create-docroot
ddev start

3. For Composer to understand your new Recipe install-type, you need to require the Composer Installer Extender package.

ddev composer require oomphinc/composer-installers-extender:2.0.1

4. Next, you need to add two entries in composer.json for an install-type and its path:

"installer-types": ["drupal-recipe"],
"installer-paths": {
 // existing entries omitted...
 "docroot/recipes/contrib/{$name}": [
   "type:drupal-recipe"
 ]
}

5. Execute the specified commands to include these two repositories in the composer.json file

ddev composer config repositories.drupal8 composer https://packages.drupal.org/8
ddev composer config repositories.asset-packagist composer https://asset-packagist.org

6. To configure the minimum stability and enable patching, execute the following commands

ddev composer config minimum-stability dev
ddev composer config extra.enable-patching true

7. To enable specific composer plugins for patching and installation purposes, execute the following commands

ddev composer config --no-plugins allow-plugins.cweagans/composer-patches true
ddev composer config --no-plugins allow-plugins.oomphinc/composer-installers-extender true

8. To install Composer Patches Plugin and Drush, execute the following commands

ddev composer require cweagans/composer-patches
ddev composer require drush/drush

9. To merge the composer.libraries.json file into your main composer.json, install the Composer Merge Plugin. From the project directory, open a terminal and run

ddev composer require wikimedia/composer-merge-plugin

10. Then Edit the composer.json file of your Drupal website, and under the "extra" section add this entry

"merge-plugin": { "include": [ "web/modules/contrib/*/composer.libraries.json" ] }

11. To require the dev-main branch of ez page builder, execute this command

ddev composer require drupal/ez_page_builder:^1.0.1

12. Now run below commands to configure your site

ddev composer install
ddev drush si
ddev drush recipe recipes/contrib/ez_page_builder;

C. Install the recipe in existing project

1. For Composer to understand your new Recipe install-type, you need to require the Composer Installer Extender package.

composer require oomphinc/composer-installers-extender:2.0.1

2. Next, you need to add two entries in composer.json for an install-type and its path:

"installer-types": ["drupal-recipe"],
"installer-paths": {
 // existing entries omitted...
 "docroot/recipes/contrib/{$name}": [
   "type:drupal-recipe"
 ]
}

3. Execute the specified commands to include these two repositories in the composer.json file

composer config repositories.drupal8 composer https://packages.drupal.org/8
composer config repositories.asset-packagist composer https://asset-packagist.org

4. To configure the minimum stability and enable patching, execute the following commands

composer config minimum-stability dev
composer config extra.enable-patching true

5. To enable specific composer plugins for patching and installation purposes, execute the following commands

composer config --no-plugins allow-plugins.cweagans/composer-patches true
composer config --no-plugins allow-plugins.oomphinc/composer-installers-extender true

6. To install Composer Patches Plugin and Drush, execute the following commands

composer require cweagans/composer-patches
composer require drush/drush

7. To merge the composer.libraries.json file into your main composer.json, install the Composer Merge Plugin. From the project directory, open a terminal and run

composer require wikimedia/composer-merge-plugin

8. Then Edit the composer.json file of your Drupal website, and under the "extra" section add this entry

"merge-plugin": { "include": [ "web/modules/contrib/*/composer.libraries.json" ] }

9. To require the dev-main branch of ez page builder, execute this command

composer require drupal/ez_page_builder:^1.0.1

10. Now run below commands to configure your site

composer install
drush recipe recipes/contrib/ez_page_builder;

Tech Stack

CMS: Drupal

Note: This recipe depends on contributed libraries. Ensure you have Composer set up to manage these dependencies effectively by following the instructions in the guide.

Recommended Method for Installing, Updating, and Managing Contributed Module Libraries Using Composer

For detailed instructions on how to efficiently manage and install libraries for contributed Drupal modules using Composer, please refer to the official guide:

This guide covers how to merge the composer.libraries.json with your site's composer.json file for seamless updates.

drupal/ez_page_builder 适用场景与选型建议

drupal/ez_page_builder 是一款基于 PHP 开发的 Composer 扩展包，目前已累计 22 次下载、GitHub Stars 达 0，最近一次更新时间为 2024 年 10 月 24 日，在 PHP 生态内属于活跃度较高的组件。

我们在过去多个企业项目中使用过 drupal/ez_page_builder 或与其功能相近的方案，如果你在选型或落地过程中遇到问题，例如 版本兼容、二次改造、私有化封装、与内部系统对接、生产 BUG 排查，欢迎联系我们协助评估。

围绕 drupal/ez_page_builder 我们能提供哪些服务？

定制开发 / 二次开发

基于 drupal/ez_page_builder 在你已有业务上做功能扩展、字段裁剪、UI 适配、与内部账号 / 权限 / 日志系统的深度对接。

BUG 修复 & 性能优化

线上偶发问题、内存泄漏、慢查询、并发异常等排查修复；针对高流量场景做缓存、队列、索引层面的调优。

项目外包 & 长期维护

承接完整的项目从需求 → 设计 → 开发 → 上线 → 长期运维；也可按月提供技术保姆服务。

yvsm@zunyunkeji.com QQ：316430983 微信：yvsm316 西安尊云信息科技 · 专注 PHP / Go / 分布式系统研发

drupal/ez_page_builder

包简介

README 文档

README

Installation

A. Create a new project using composer

1. Firstly, To create a new project and navigate to the project directory, you need to execute the following commands:

2. For Composer to understand your new Recipe install-type, you need to require the Composer Installer Extender package.

3. Next, you need to add two entries in composer.json for an install-type and its path:

4. Execute the specified commands to include these two repositories in the composer.json file

5. To configure the minimum stability and enable patching, execute the following commands

6. To enable specific composer plugins for patching and installation purposes, execute the following commands

7. To install Composer Patches Plugin and Drush, execute the following commands

8. To merge the composer.libraries.json file into your main composer.json, install the Composer Merge Plugin. From the project directory, open a terminal and run

9. Then Edit the composer.json file of your Drupal website, and under the "extra" section add this entry

10. To require the dev-main branch of ez page builder, execute this command

11. Now run below commands to configure your site

B. Create a new project using ddev

1. Firstly, To create a new project and navigate to the project directory, you need to execute the following commands:

2. To set up config and start your ddev project, execute the following commands

3. For Composer to understand your new Recipe install-type, you need to require the Composer Installer Extender package.

4. Next, you need to add two entries in composer.json for an install-type and its path:

5. Execute the specified commands to include these two repositories in the composer.json file

6. To configure the minimum stability and enable patching, execute the following commands

7. To enable specific composer plugins for patching and installation purposes, execute the following commands

8. To install Composer Patches Plugin and Drush, execute the following commands

9. To merge the composer.libraries.json file into your main composer.json, install the Composer Merge Plugin. From the project directory, open a terminal and run

10. Then Edit the composer.json file of your Drupal website, and under the "extra" section add this entry

11. To require the dev-main branch of ez page builder, execute this command

12. Now run below commands to configure your site

C. Install the recipe in existing project

1. For Composer to understand your new Recipe install-type, you need to require the Composer Installer Extender package.

2. Next, you need to add two entries in composer.json for an install-type and its path:

3. Execute the specified commands to include these two repositories in the composer.json file

4. To configure the minimum stability and enable patching, execute the following commands

5. To enable specific composer plugins for patching and installation purposes, execute the following commands

6. To install Composer Patches Plugin and Drush, execute the following commands

7. To merge the composer.libraries.json file into your main composer.json, install the Composer Merge Plugin. From the project directory, open a terminal and run

8. Then Edit the composer.json file of your Drupal website, and under the "extra" section add this entry

9. To require the dev-main branch of ez page builder, execute this command

10. Now run below commands to configure your site

Tech Stack

Recommended Method for Installing, Updating, and Managing Contributed Module Libraries Using Composer

drupal/ez_page_builder 适用场景与选型建议

统计信息

GitHub 信息

其他信息